| Technical parameters | DT7-1M10/AD240 | DT7-2M10/AD240 | DT7-1SM10/AD240 |
| Function | Multifunction(10 delay modes) | ||
| Supply terminals | A1-A2 | ||
| Voltage range | AC/DC24V~240V(50-60Hz) | ||
| Power input | AC max.6VA/1.3W | ||
| Supply voltage tolerance | -15%;+10% | ||
| Time ranges | 0.1s-10day | ||
| Time setting | potentiometer | ||
| Time deviation | ≤10% | ||
| Repeat accuracy | 0.2%-set value stability | ||
| Temperature coefficient | 0.05%/℃,at=20℃(0.05%°F, at=68°F) | ||
| Output | 1×SPDT | 2×SPDT | 1x static contactless output(triac) |
| Current rating | 1×10A(AC1) | 2×10A(AC1) | 0.7A |
| Switching voltage | 250VAC/24VDC | ||
| Min. breaking capacity DC | 500mw | ||
| Mechanical life | 1×10^7 | >1×10^8 | |
| Electrical life(AC1) | 1×10^5 | >1×10^8 | |
| Reset time | max.200ms | ||
| operating temperature | -20℃ to+55℃(-4°F to 131°F) | ||
| Storage temperature | -35℃to+75℃ (-22°F to 158°F) | ||
| Mounting/DIN rail | Din rail EN/IEC 60715 | ||
| Protection degree | IP40 for front panel/IP20 terminals | ||
| Operating position | any | ||
| Overvoltage cathegory | Ⅲa | ||
| Pollution degree | 2 | ||
| Max.cable size(mm²) | solid wire max.1×2.5or 2×1.5/with sleeve max.1×2.5(AWG12) | ||
| Dimensions | 90×18×70mm | ||
| Weight | 52g | ||
| Standards | EN61812-1,IEC60947-5-1 | ||
