DV5-01~02 Voltage Monitor Relay

Function Features

-Controls its own supply voltage(True RMS measurement).

-Set 10-level rated operating voltage through knob.

– Measuring frequency range:45Hz-65Hz.

– Voltage measurement accuracy<1%.

– Relay status is indicated by LED.

– 1-MODULE,DIN rail mounting.

Peak Overload:< 1 ms

Technical parameters	AD240	A220	AD48	D12
Function	overvoltage, undervoltage of Monitoring 1-phase voltage
Monitoring terminals	A1-A2
Voltage range	ACDC48V-276V	AC160V-276V	ACDC15V-100V	DC6V-30V
Rated supply frequency	ACDC	45Hz-65Hz	ACDC	DC
Measuring range	65V-260V	180V-260V	20V-80V	9V-15V
Threshold adjustment voltage	Adjustable
Max.Permanent:	276V	276V	100V	30V
Hysteresis	Adjustable
Peak Overload:< 1 ms	290 V	50 V	290 V	36V
Time delay	Adjustable 0.1s-10s,10%
Measurement error	≤1%
Run up delay at power-up	0.5s time delay
Konb setting accuracy	10% of the scale value
Reset time	1000ms
Output	SPDT
Current rating	10A/AC1
Switching voltage	250VAC/24VDC
Min. breaking capacity DC	500mW
Temperature coefficient	0.05%/℃,at=20℃(0.05%℉，at=68℉)
Mechanical life	1×10^7
Electrical life(AC1)	1×10^5
Operating temperature	-20℃ to +55℃（-4℉ to 131℉）
Storage temperature	-35℃ to +75℃（-22℉ to 158℉）
Mounting/DIN rail	Din rail EN/IEC 60715
Protection degree	IP40 for front panel/IP20 terminals
Operating position	any
Overvoltage category	III
Pollution degree	2
Max.cable size(mm 2)	solid wire max.1×2.5or 2×1.5/with sleeve max.1×2.5(AWG 12)
Tightening torque	0.5Nm
Dimensions	90×18×70mm
Weight	61g-66g
Standards	EN61812-1,IEC60947-5-1